Indonesia
English

SVCL10-32



Download PDF (433,4 Kb)

Symbol :
DESCRIPTION
A solenoid-operated, normally-closed, on/off, poppet-type, screw-in hydraulic cartridge
valve incorporating an integral load-sense pressure port with isolation check.

OPERATION
When de-energized, the SVCL10-32 blocks flow at ports 3 and 1. When energized, flow is
allowed from 3 to 1 and 2 with a check-isolated load sense signal supplied at 2. Reverse
flow is not allowed from 1 to 3.

NOTE: When using this valve in bridge circuits, seals should not be used on the pilot pistons
of the pilot-operated check valves. This is to avoid trapping oil which would keep the pilot-operated
check valve open.

FEATURES
• Continuous-duty rated coil.
• Hardened precision seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• All ports may be fully pressurized.
• Unitized, molded coil design.
• Optional waterproof E‑Coils rated up to IP69K.
• Industry common cavity.
• Reduce manifold space claim. 

RATINGS
Operating Pressure: 250 bar (3625 psi)
Flow: Up to 57 lpm (15 gpm)
Internal Leakage: Port 1 and 3: 5 drops/minute max. at 250 bar (3625 psi);
  Port 2: 10 drops/minute max. at 250 bar (3625 psi) 
Temperature: -40 to 121 °C (-40 to 212 °F) with Buna N 
   -26 to 204 °C (-15 to 400 °F) with fluorocarbon seals
   -54 to 107 °C (-65 to 225 °F) with polyurethane seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.67 A at 12 Vdc; 
   0.18 A at 115 Vac (full wave rectified). 
   E‑Coil: 1.7 A at 12 Vdc; 0.85 A at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 
  7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC10-3, Variation 'B'; See page 9.110.1_3w
Cavity Tool: CT10-3xx; See page 8.600.1
Seal Kit: SK10-3x-MM; See page 8.650.1
Coil Nut: Part No. 7004400


Performance :

Dimensions :